CG-BGA-4020 Datasheet, PDF (4/4 Pages) Ironwood Electronics. – Minimum real estate required

14
1
6
8
10
18
17
4
15
13
12
2
3
9
16
5
7
11
ITEM NO.
1
2
3
4
5
6
7
DESCRIPTION
Custom socket base 14mm IC
Clam shell lid for 17mm IC
Custom compression plate for 14mm IC
M10 Comression Screw
Clamshell Latch
Ball Guide 13x13 array 1mm pitch custom
footprint
Elastomer Guide custom footprint
8
0.5mm thick, 0.05x 0.05mm pitch, 50mm sqr,
Z-axis conductive angled elastomer
9
Customer's BGA device
10
Test PCB 14x14mm 13x13 array 1mm pitch
custom footprint
11
Custom Clamshell Backing Plate
12
Precision Compression Spring, Zinc-Plated
Music Wire, 1/2" Length, .12" OD, .016" Wire
13
Spring Clamshell lid assembly
14
Hinge Pin and Snap Ring, 3mm OD, 25mm
long, SS
15
Screw, M3 x 12mm, Low Head Cap, SS
16
Dowel Pin, 1/32" x 3/16", SS
17
#0-80 X .375 LG, SOC HD CAP SCREW,
ALLOY STL, BLK OXIDE
18
Insulating washer, 4mm OD.
19
Insulating disk, 2mm OD with 2 mil thk
Adesive
Material
7075-T6 Aluminum Alloy
7075-T6 Aluminum Alloy
7075-T6 Alumium Alloy
7075-T6 Aluminum Alloy
7075-T6 Aluminum Alloy
Kapton Polyimide/Cirlex
Ultem 1000
20 Micron dia gold plated brass
filaments arranged symettrically in a
silicon rubber (63.5 degree angle),
Thickness: 0.5mm
FR4 High temp
Material <not specified>
7075-T6 Aluminum Alloy
Zinc Plated Music Wire
Steel Music Wire
Stainless Steel (ferritic)
18-8 Stainless Steel
Chrome Stainless Steel
Alloy Steel
Kapton Polyimide/Cirlex
Kapton Polyimide/Cirlex
Orientation mark
3.620
1.71 (x4)
22.400 (x4)
3.620
2.00 (x3)
18.40±0.05
2.65
2.50
5.00
Description: Skt and Backing plate Detail
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-BGA-4020 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish: N/A
Weight: 69.63
Backing Plate Top View
4.00 (x4)
Backing Plate Side View
STATUS: Released
ENG: S. Huang
FILE: CG-BGA-4020 Dwg
SHEET: 4 OF 4
DRAWN BY: M. Raske
DATE: 05/09/2014
REV. A
SCALE: 1.8:1