CBT-BGA-6011 Datasheet, PDF (4/4 Pages) Ironwood Electronics. – Automated probe manufacturing enables low cost and short lead time

20
14
4
19
22
21
18
2
10
15
6
17
L
A1 Corner
L
3
13
5
12
8
9
11
7
16
1
5.81
ITEM
NO.
Description
Material
1 Bottom Pogo Guide BGA48 9x12mm 1mm pitch
Ultem
2 Socket Base 12mm snap lid
PPS
3 12mm Plastic Snap Clamshell Socket Lid
PPS/Ultem
4 Clamshell Latch Snap Lid Socket
PPS/Ultem
5 Compression Plate Plastic Snap lid 10mm
PPS/Ultem
6 Target PCB BGA48 9x12mm 1mm pitch
Material <not specified>
7 Middle guide BGA48 9x12mm 1mm pitch
Ultem 1000
8 BGA 10x12mm 1mm pitch
FR4
9 Top Floating Guide BGA 9x12mm 1mm pitch
Ultem 1000
10 Pogo Pin, 1mm Pitch SBT BGA pin
11 Floating Guide Spring
Alloy Steel (SS)
12 Dowel Pin, M1.5 X 20mm LG, 18-8 SS
13 Torsion Spring, 180 0.109" OD, SS
AISI 347 Annealed Stainless
Steel (SS)
Stainless Steel (302)
14 2mm diameter Hinge Pin, 20 mm long
Alloy Steel
15 Screw, #0-80 X .313", Flat, SS
Material <not specified>
16 Dowel Pin, M1 x 4mm, STL
Alloy Steel
17 Nut, M2 x 1.2mm, SS
18-8 Stainless Steel
18 Screw, M2 x 10mm, Cap, SS STL
AISI 316 Stainless Steel
Sheet (SS)
19 Dowel Pin, M1 x 3mm, STL
Alloy Steel
20 Wave Spring 0.375"OD 0.15" ln 100lbs/in
Steel Music Wire
21 Nut, #0-80 x 3/64", SS
22 Snap ring for 2mm Hinge pin 0.15" OD
1023 Carbon Steel Sheet
(SS)
0.5
Stroke length
M
SECTION L-L
0.2
Target PCB
Description: Socket Assy, Insulation Plate
Pre-Compression
DETAIL M
SCALE 8 : 1
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CBT-BGA-6011 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 12.87
STATUS: Released
DRAWN BY: M. Raske
FILE: CBT-BGA-6011
SHEET: 4 OF 4
SCALE: 2:1
DATE: 09/05/2012
REV. A