SS-BGA196C-01 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Minimum real estate required

Recommended PCB Layout
Top View
2.738mm*
Orientation Mark
1.00mm typ.
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
backing plate
2.363mm
20.225mm±0.125mm
Socket size
22.73mm±0.13mm sqr.
Backing plate size
2.50mm [0.098"]
5.08mm
1.25mm±0.13mm (x4)
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
SS-BGA196C-01 Drawing
© 2007 IRONWO^. OD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
17.725mm (x4)
1.25mm±0.13mm (x4)
2.50mm [0.098"]
20.60mm [0.811"]
Socket size
2.54mm
Ø 0.850mm±0.025mm (x2)
Alignment Hole
Ø 0.51mm pad (x196)
socket base
Ø 1.75mm±0.05mm (x4)
Mounting Hole
DXF DATA WILL BE PROVIDED
Status: Released
Drawing: J. Glab
File: SS-BGA196C-01 Dwg
Scale: 1.25:1 Rev: A
Date: 03/23/07
Modified:
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
PAGE 2 of 4