SS-BGA196C-01 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Minimum real estate required

Top View
A
39.23mm
[1.544"]
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
A
Side View
(Section AA)
11
32.60mm [1.283"]
4
43.32mm
[1.706"]
+ IC thickness
Customer's PCB
10
1
3
2
6
5
9
8
7
Materials:
1
Clam Shell Lid: Black anodized Aluminum.
Height = 20 mm.
Socket Base: Black anodized Aluminum.
2 _{Height = 6 mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 12 mm.}
Compression Screw: Clear anodized Aluminum.
4 _{Height = 27 mm, Fluted Knob}
Pogo Pin:
Plungers - Hardened Steel/ Gold plated
5 _{Barrel - Copper Alloy/ Gold plated}
Spring - Stainless Steel/ Gold wire
6 ^{Pogo Pin Guides: Ultem 1000.}
Socket Base Screw: Socket Head Cap Screw,
7 _{alloy steel with black oxide finish, 0-80 Thread,}
5/8" long.
8 ^{Backing Plate: Black anodized Aluminum}
9 ^{Insulation Plate: FR4/G10}
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 _{SS, 0-80 thread, 3/16" long.}
11 ^{Latch: Black anodized Aluminum.}
SS-BGA196C-01 Drawing
© 2007 IRONWO^. OD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: SS-BGA196C-01 Dwg
Scale: 1.25:1 Rev: A
Date: 03/23/07
Modified:
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4