SM-BGA-9056 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Minimum real estate required

Socket orientation
mark corner
6.3625±0.0250 (x4)
3.1125
0.25 pad (x103)
1.710±0.0250 (x4)
0.850±0.025 THRU (x2)
non plated alignment hole
4.8925
A1
3.8225±0.0250
B
2.9400
DETAIL B
SCALE 14 : 1
0.50
0.50
6.5000
15.225±0.125 socket base size
17.7250±0.1250 backing plate size
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9056 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 31.09
0.50
0.85
0.40
0.62
0.50
0.70
0.50
0.62
STATUS: Released
ENG: E. Smolentseva
FILE: SM-BGA-9056 Dwg
0.40
0.40
0.40
Target PCB Recommendations
Total thickness: 0.76mm min.
Plating: Gold or Solder finish
SHEET: 2 OF 5
DRAWN BY: M. Raske
DATE: 12/22/2014
REV. A
SCALE: 7:1