SM-BGA-9054 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Highly compliant to accommodate wide co-planarity variations

BGA PIN A1 ORIENTATION
4.1125 *
3.8625
5.00
1.2825
6.3625 (x4)
*Note: BGA pattern is not symmetrical with respect
to the mounting holes, it is offset 0.25mm
0.50 typ.
1.71±0.1 (x4)
non plated mounting holes
0.85±0.025 (x2)
non plated alignment holes
3.8225
0.28 (x121 pad)
Full array shown
5.00
6.3625 (x4)
15.225
Socket Base Outline
17.725
Socket Base Outline
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9054 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 7.82
STATUS: Released
ENG: S. Faiz
FILE: SM-BGA-9054 Dwg
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than
solder mask
SHEET: 2 OF 5
DRAWN BY: M. Raske
DATE: 09/16/2014
REV. A
SCALE: 6:1