SM-BGA-9043 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Direct mounts to target PCB with hardware

Recommended PCB Layout
A1
4.0125 *
2.350
6.3625
3.3625
3.00
15.225±0.125
SOCKET BASE OUTLINE
1.2825
6.3625
*BGA pattern is not symetrical with
mounting holes. BGA pattern is shifted
right of center 0.25mm
0.30 typ. (x178)
1.70±0.10 Non Plated Mounting Hole (X4)
0.85±0.025 Non Plated Alignment Hole
for dowel pins (X2)
3.8225
6.00
0.40
5.20
6.3625
6.3625
Description: Recommended PCB layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9043 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 6.53
STATUS: Released
ENG: S. Faiz
FILE: SM-BGA-9043 Dwg
Target PCB Recommendations
Total thickness: 0.864mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 12/12/2013
REV. B
SCALE: 6:1