SM-BGA-9040 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Excellent signal integrity at high frequencies

10.4250±0.0250
0.80 Typ.
Note: BGA pattern is not symmetrical
with respect to the mounting holes.
BGA array is shifted 0.375mm down
from center.
0.850±0.025
non plated alignment holes
10.8000±0.0250
7.7825±0.0250
10.3225±0.0250
0.43 (x656)
6.00
12.8625±0.05 (x8)
28.2250
Socket Base Size
1.70±0.10 (x4)
non plated mounting holes
30.000±0.125
backing plate
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance
±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9040 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish: --
Weight: 136.39
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
STATUS: Released
ENG: V. Panavala
FILE: SM-BGA-9040 Dwg
SHEET: 2 OF 5
DRAWN BY: M. Raske
DATE: 10-16-2013
REV. B
SCALE: 2.5:1