SM-BGA-9022 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Highly compliant to accommodate wide co-planarity variations

2.3625
2.3625
9.7825±0.0250
32.225
Zero Keep out area Outline
25
12.50
A1 corner
2.613
0.510 (x388 PAD)
1 typ.
1.5mm tall milled area
on the socket base
12.3225±0.0250
25(x4)
29.725±0.050(x4)
Note: BGA pattern is symmetrical with
respect to the mounting holes.
Description: Recommended PCB layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all
other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9022 Drawing
©2015 Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 154.62
STATUS: Released
ENG: V. Panavala
FILE: SM-BGA-9022 Dwg
2X 0.850±0.025 THRU ALL
Non Plated Hole
4X 1.70±0.10 THRU ALL
Non Plated Hole
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
SHEET: 2 OF 4
DRAWN BY: V. Panavala
DATE: 2/6/2013
REV. B
SCALE: 3:1