SM-BGA-9012 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Direct mounts to target PCB with hardware

Recommended PCB Layout
A1 corner
4.50
A1
6.3625
15.225±0.125
SOCKET BASE OUTLINE
2.625
1.2825
6.3625
0.75 typ.
1.70±0.10 Non Plated Mounting Hole (X4)
0.85±0.025 Non Plated Alignment Hole
for dowel pins (X2)
0.75 typ. 3.8225
0.42 PADS (X102)
6.3625
7.95
6.3625
4.8 plastic washer (X4)
17.50
Description: Recommended PCB layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all
other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9012 Drawing
©2015 Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 10.96
STATUS: Released
ENG: E. Smolentseva
FILE: SM-BGA-9012 Dwg
Target PCB Recommendations
Total thickness: 0.864mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
SHEET: 2 OF 4
DRAWN BY: D. Hauer
DATE: 6/12/2012
REV. B
SCALE: 5:1