SG-BGA-6399 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Easily removable swivel socket lid

14.400
33.725
28.80
11.7825
38.725
BACKING PLATE
36.225
SOCKET BASE
14.025 *
16.8625
*Note: BGA pattern is shifted 0.375 right of center.
1.75±0.10 (x8)
NON-PLATED MOUNTING HOLE
0.035 A B
0.8500+- ^00..00215205 (x2)
NON-PLATED ALIGNMENT HOLE
0.025 A B
14.3225
B
0.43 PAD (x1369)
0.80 TYP
0.375*
16.8625
A
Description: Recommended PCB layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SG-BGA-6399 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 126.83
STATUS: Released
ENG: S. Huang
FILE: SG-BGA-6399 Dwg
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
SHEET: 2 OF 5
DRAWN BY: M. Raske
DATE: 1/15/2014
REV. A
SCALE: 3:1