CG-BGA-5005 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
Orientation Mark
1.25mm±0.13mm (x4)
1.25mm±0.13mm (x4)
2.1125mm
Socket Body
Size
10.5mm
5.08mm
Keep out Area (A): Max. component height 3.5mm
Keep out Area (B): Max. Component height 10mm
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
CG-BGA-5005 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
3.1125mm
Keep out Area (B)
Keep out Area (A)
0.5mm typ.
2.54mm
Ø 0.85mm±0.025mm (x2)
Non plated alignment hole
Ø 0.27mm pad (x396)
8.5mm
Ø 1.61mm±0.05mm (x4)
Non plated mounting hole
14.725mm (x4)
17.225mm±0.125mm (x4) _{(No component area)}
19.73mm sqr.
backing plate outline
All dimensions are in mm unless stated otherwise
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
Status: Released
Scale: -
Rev: A
Drawing: Vinayak R
Date: 8/31/09
File: CG-BGA-5005 Dwg
Modified:
PAGE 2 of 4