SS-BGA650A-01 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
36.225mm
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Side View
(Section AA)
Assembled
11.61mm
Socket Lid: Black anodized Aluminum.
A
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 6.5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
36.225mm
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Recommended torque = 18 in lbs.
Pogo Pin:
5 Plungers - Hardened Steel/ Gold plated
1
4
Barrel - Copper Alloy/ Gold plated
9
3
Spring - Stainless Steel/ Gold wire
6 Pogo Pin Guides: PEEK, 2.65mm height.
Pogo Pin Guide Screw: Pan head phillips, 18-8 SS, 0-80
7 thread, 3/16" long.
2
8
8
Socket base screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 15.88mm long.
9
Socket lid screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 4.76mm long.
6
7 _Customer's
5
BGA IC
11
10
Customer's Target PCB
10 ^{Insulation Plate: FR4/G10, Thickness = 1.59mm.}
11
Backing Plate: Black anodized Aluminum.
Thickness = 6.35mm.
SS-BGA650A-01 Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: M.A. Fedde
File: SS-BGA650A-01 Dwg.mcd
Scale: -
Rev: A
Date: 12/21/08
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4