SG-QFE-7006 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
30.225mm
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12
30.225mm
6
10
SG-QFE-7006 Drawing
Customer's
QFP IC
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Ste 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
GHz QFP144 Socket - Direct mount,
solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
4
3
Recommended torque = 3 in lbs.
9
2
8
7
5
11
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
3 ^{Compression Plate: Ultem 1000}
Compression screw: Black anodized 6061 Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.5mm.}
7 ^{IC Guide: Torlon}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Socket shoulder screw 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
12 ^{Lead Guide: Kapton Polyamide 0.003" thick}
Status: Released
Drawing: V. Panavala
File: SG-QFE-7006 Dwg
Scale: -
Rev: B
Date: 10/8/10
Modified: 04/29/15, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3