CG-QFN-7005 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

A
30.23mm
[1.190"]
Top View
A
8
25.48mm [1.003"]
Approximate
assembled
height
34.5mm
+ IC thickness
8
Customer's PCB
Side View
11
6
7
(Section AA)
4
1
3
2
5
10
9
5
End View
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
Materials:
Clam Shell Lid: Black anodized Aluminum.
1 _{Height = 16.5 mm.}
Socket Base: Black anodized Aluminum.
2 _{Height = 6 mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 8.5 mm.}
4
Compression Screw: Clear anodized Aluminum.
Height = 25 mm, Fluted Knob
5 Socket Base Screw: Socket Head Cap Screw, alloy steel
with black oxide finish, 0-80 Thread, 3/8" long.
6 Customer's QFN IC
Elastomer: 20 micron dia gold plated brass
7 _{filaments arranged symmetrically in a silicone}
rubber (63.5 degree angle).
Thickness = 0.5mm.
8 Latch: Black anodized Aluminum.
Nylon washer: 1.73mm ID; 4.78mm OD
9
0.64mm thickness.
Elastomer Guide: Non-clad FR4.
10 Thickness = 0.475mm.
11 _{IC Guide: Torlon}
Thickness = 0.45mm.
CG-QFN-7005 Drawing
© 2011 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: B
Drawing: E Smolentseva
File: CG-QFN-7005 Dwg.mcd
Date: 2/24/11
Modified: 05/28/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4