IRFR8314PBF_15 Datasheet, PDF (9/9 Pages) International Rectifier – Optimized for UPS/Inverter Applications

IRFR8314PbF
Qualification Information^†
Qualification Level
Moisture Sensitivity Level
RoHS Compliant
D-Pak
Industrial
(per JEDEC JESD47F) ^††
MSL1
Yes
† Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability/
†† Applicable version of JEDEC standard at the time of product release.
Notes:
Calculated continuous current based on maximum allowable junction temperature. Bond wire current limit is
90A by source bonding technology. Note that current limitations arising from heating of the device leads may occur with
some lead mounting arrangements. (Refer to AN-1140)
 Repetitive rating; pulse width limited by max. junction temperature.
Limited by T_Jmax, starting T_J = 25°C, L = 0.07mH, R_G = 50, I_AS = 72A, V_GS =10V. 
Pulse width  400µs; duty cycle  2%.
 R_ is measured at T_J approximately 90°C.
This value determined from sample failure population, starting T_J =25°C,
L=0.07mH, R_G = 50, I_AS = 72A, V_GS =10V.
 When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to
application note #AN-994.please refer to application note to AN-994: http://www.irf.com/technical-info/appnotes/an-994.pdf
Revision History
Date
07/01/2014
Comments
The Device is active without bulk part which is removed from Table on page 1
IR WORLD HEADQUARTERS: 101N Sepulveda Blvd, El Segundo, California 90245, USA
To contact Interna onal Rec fier, please visit h p://www.irf.com/whoto‐call/
9 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback
July 01, 2014