IRF7495TRPBF Datasheet, PDF (8/8 Pages) International Rectifier – Low Gate to Drain Charge to Reduce Switching Losses

IRF7494PbF
SO-8 Tape and Reel
Dimensions are shown in millimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
14.40 ( .566 )
12.40 ( .488 )
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature.
‚ Starting T_J = 25°C, L = 55mH,
R_G = 25Ω, I_AS = 3.1A.
ƒ When mounted on 1 inch square copper
board, t ≤ 10 sec.
„ Pulse width ≤ 400µs; duty cycle ≤ 2%.
… C_oss eff. is a fixed capacitance that gives the same charging time
as C_oss while V_DS is rising from 0 to 80% V_DSS.
† I_SD ≤ 3.1A, di/dt ≤ 1907A/µs, V_DD ≤ V_(BR)DSS, T_J ≤ 150°C.
‡ R_θ is measured at T_J of approximately 90°C.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualifications Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information.10/2009
8
www.irf.com