AUIRS2184S_15 Datasheet, PDF (5/25 Pages) International Rectifier – Floating channel designed for bootstrap operation

AUIRS2184(4)S
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All
voltage parameters are absolute voltages referenced to COM lead. Stresses beyond those listed under "
Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only; and
functional operation of the device at these or any other condition beyond those indicated in the
“Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rated conditions for
extended periods may affect device reliability. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions. Ambient temperature (T_A) is 25°C, unless otherwise
specified.
Symbol
Definition
Min
Max
Units
V_B
V_S
V_HO
V_CC
V_LO
DT
V_IN
V_SS
dV_S/dt
High-side floating absolute voltage
High-side floating supply offset voltage
High-side floating output voltage
Low-side and logic fixed supply voltage
Low-side output voltage
Programmable deadtime pin voltage
Logic input voltage (IN & SD )
Logic ground
Allowable offset supply voltage transient
-0.3
V_B - 25
V_S - 0.3
-0.3
-0.3
V_SS -0.3
V_SS -0.3
V_CC - 20
—
620
V_B + 0.3
V_B + 0.3
20^†
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
50
V
V/ns
(8-lead SOIC)
—
0.625
P_D
Package power dissipation @ TA ≤ 25°C
W
(14-lead SOIC) —
1.0
Rth_JA
(8-lead SOIC)
—
Thermal resistance, junction to ambient
(14-lead SOIC) —
200
°C/W
120
T_J
Junction temperature
—
150
T_S
Storage temperature
-50
150
°C
T_L
Lead temperature (soldering, 10 seconds)
—
300
† All supplies are fully tested at 25 V and an internal 20 V clamp exists for each supply.
5 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback
July 22, 2014