AUIRF4104 Datasheet, PDF (3/15 Pages) International Rectifier – HEXFET® Power MOSFET

AUIRF4104/S
Qualification Information^†
Automotive
(per AEC-Q101) ^††
Qualification Level
Comments: This part number(s) passed Automotive
qualification. IR’s Industrial and Consumer qualification level is
granted by extension of the higher Automotive level.
Moisture Sensitivity Level
Machine Model
TO-220AB
D² PAK
ESD
Human Body Model
Charged Device
Model
RoHS Compliant
N/A
MSL1
Class M4
AEC-Q101-002
Class H1C
AEC-Q101-001
Class C3
AEC-Q101-005
Yes
† Qualification standards can be found at International Rectifier’s web site: http//www.irf.com/
†† Exceptions to AEC-Q101 requirements are noted in the qualification report.
Notes:
 Repetitive rating; pulse width limited by
… This value determined from sample failure population,
max. junction temperature. (See fig. 11).
starting T_J = 25°C, L = 0.04mH, R_G = 25Ω, I_AS = 75A, V_GS =10V
‚ Limited by T_Jmax, starting T_J = 25°C, L = 0.04mH _{† This is applied to D}2_{Pak, when mounted on 1" square PCB}
R_G = 25Ω, I_AS = 75A, V_GS =10V. Part not
( FR-4 or G-10 Material ). For recommended footprint and
recommended for use above this value.
soldering techniques refer to application note #AN-994.
ƒ Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
‡ R_θ is measured at T_J approximately 90°C.
„ C_oss eff. is a fixed capacitance that gives the ˆ This is only applied to TO-220AB pakcage.
same charging time as C_oss while V_DS is rising ‰ Calculated continuous current based on maximum allowable
from 0 to 80% V_DSS .
junction temperature. Bond wire current limit is 75A. Note that
current limitations arising from heating of the device leads may
occur with some lead mounting arrangements.(Refer to AN-1140
http://www.irf.com/technical-info/appnotes/an-1140.pdf)
www.irf.com
3