OP300SL Datasheet, PDF (2/4 Pages) OPTEK Technologies – NPN Silicon Photodarlington

NPN Silicon Photodarlington
OP300SL Series
Absolute Maximum Ratings (T_A=25°C unless otherwise noted)
Collector-Emitter Voltage
Emitter-Collector Voltage
Storage Temperature Range
Operating Temperature Range
Soldering Temperature (5 seconds with soldering iron)
Power Dissipation
Continuous Collector Current
Electrical Characteristics (T_A = 25° C unless otherwise noted)
15.0 V
5.0 V
-65° C to +150° C
-65° C to +125° C
260° C⁽¹⁾⁽²⁾
50 mW⁽³⁾
50 mA
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
I_C(ON)(4)
On-State Collector Current
OP300SL
OP301SL
OP302SL
OP303SL
OP304SL
OP305SL
0.8 -
0.8 -
1.8 -
3.6 -
7.0 -
14.0 -
-
2.4
5.4
12.0
21.0
-
mA V_CE = 5.0 V, E_E = 1.0 or 0.4 mW/cm²⁽⁵⁾
I_CEO Collector-Dark Current
-
-
1.0
µA V_CE = 10 V, E_E = 0
V_(BR)CEO Collector-Emitter Breakdown Voltage
15.0 -
-
V I_C = 100 μA
V_(BR)ECO Emitter-Collector Breakdown Voltage
5.0 -
-
V I_E = 100 μA
Collector-Emitter Saturation Voltage
V_CE(SAT)(4)
OP300SL, OP301SL
OP302SL through OP305SL
-
-
- 1.1
- 1.1
V
I_C = 0.4 mA, E_E = 1.0 or 0.4 mW/cm²⁽⁵⁾
I_C = 1.0 mA, E_E = 1.0 or 0.4 mW/cm²⁽⁵⁾
Notes:
(1) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill-type devices to PCBoards.
(2) No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(3) Derate linearly 0.5 mW/° C above 25° C.
(4) Junction temperature maintained at 25° C.
(5) Light source is an unfiltered tungsten bulb operating at CT = 2870° K at E_E =1.0 mW/cm² or 890nm at E_E =0.4 mW/cm² .
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 05/07
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com