OP300SL Datasheet, PDF (1/4 Pages) OPTEK Technologies – NPN Silicon Photodarlington

NPN Silicon Photodarlington
OP300SL Series
Features:
• Narrow receiving angle
• Variety of sensitivity ranges
• Enhanced temperature range
• PCBoard mounting
• Mechanically and spectrally matched to OP123 and OP223 LEDs
Description:
Each device in this series is a NPN silicon photodarlington in a hermetically sealed pill package with a narrow
receiving angle that provides excellent on-axis coupling. Photodarlingtons are normally used in applications with
low light signal levels, where more current gain is needed than phototransistors can provide.
Components in the OP300 series are mechanically and spectrally matched to the OP123 and OP223 series.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation)
data, and to Application Bulletin 202 for pill-type soldering to PCBoard.
Applications:
• Non-contact reflective object sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
• Door sensor
1
Part
Number
OP300SL
OP301SL
OP302SL
OP303SL
OP304SL
OP305SL
Ordering Information
Sensor
Light Current
I_C(ON) (mA)
Min / Max
Input Power
E_E (mW/cm²)
Viewing
Angle
0.8 / NA
0.8 / 2.4
1.0 with
1.8 / 5.4
2870°K
Darlington
or
35°
3.6 / 12.0
0.4 with
7.0 / 21.0
890nm
14.0 / NA
2
Pin #
1
2
Sensor
Collector
Emitter
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 05/07
Page 1 of 4