JANTX2N6849 Datasheet, PDF (2/7 Pages) International Rectifier – POWER MOSFET P-CHANNEL(BVdss=-100V, Rds(on)=0.30ohm, Id=-6.5A)

IRFF9130
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min Typ Max Units
-100 — — V
— -0.10 — V/°C
— — 0.30
—
— 0.345 ^Ω
-2.0 — -4.0 V
2.5 — — S ( )
— — -25
— — -250 µA
— — -100
— — 100 nA
14.7 — 34.8
1.0 — 7.1 nC
2.0 — 21
— — 60
— — 140
—
— 140 ^ns
— — 140
— 7.0 — _nH
— 800
— 350 — pF
— 125 —
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -10V, ID = -4.1A ➃
VGS =-10V, ID =-6.5A ➃
VDS = VGS, ID = -250µA
VDS > -15V, IDS = -4.1A ➃
VDS= -80V, VGS=0V
VDS = -80V
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-10V, ID = -6.5A
VDS= -50V
VDD = -50V, ID = -6.5A,
VGS =-10V,RG =7.5Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
ISM
VSD
trr
QRR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
— — -6.5 _A
— — -25
— — -4.7 V
Tj = 25°C, IS =-6.5A, VGS = 0V ➃
— — 250 nS Tj = 25°C, IF = -6.5A, di/dt ≤ -100A/µs
— — 3.0 µC
VDD ≤ -50V ➃
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max
— — 5.0
— — 175
Units
°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com