JANTX2N6782_15 Datasheet, PDF (2/7 Pages) International Rectifier – Repetitive Avalanche Ratings

IRFF110
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage
100 — — V
VGS = 0V, ID = 1.0mA
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.10 — V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.60
—
— 0.69
Ω
VGS = 10V, ID = 2.25A ➃
VGS =10V, ID = 3.5A ➃
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
2.0 — 4.0 V
0.8 — — S ( )
VDS = VGS, ID = 250µA
VDS > 15V, IDS = 2.25A ➃
IDSS
Zero Gate Voltage Drain Current
— — 25
VDS= 80V, VGS=0V
— — 250 µA
VDS = 80V
VGS = 0V, TJ = 125°C
IGSS
Gate-to-Source Leakage Forward
— — 100
VGS = 20V
IGSS
Gate-to-Source Leakage Reverse
— — -100 nA
VGS = -20V
Qg
Total Gate Charge
4.1 — 6.5
VGS =10V, ID = 3.5A
Qgs
Gate-to-Source Charge
0.4 — 1.6 nC
VDS= 50V
Qgd
Gate-to-Drain (‘Miller’) Charge
1.4 — 3.5
td_(on)
Turn-On Delay Time
— — 15
VDD = 50V, ID = 3.5A,
tr
td_(off)
Rise Time
Turn-Off Delay Time
— — 25
—
— 25 ^{n s}
RG = 7.5Ω
tf
Fall Time
— — 20
LS ₊ LD
Total Inductance
—
7.0
—
nH
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
— 180
— 82 — pF
— 15 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
ISM
VSD
trr
QRR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
— — 3.5 _A
— — 14
— — 1.5 V
— — 180 nS
— — 2.0 µC
Tj = 25°C, IS =3.5A, VGS = 0V ➃
Tj = 25°C, IF = 3.5A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
— — 8.3
°C/W
— — 175
Test Conditions
Typical socket mount.
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com