JANSR2N7468U2 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-2)

IRHNA57064, JANSR2N7468U2
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage
60 — —
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.065 —
Voltage
V
VGS = 0V, ID = 1.0mA
V/°C Reference to 25°C, ID = 1.0mA
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.0056 Ω
VGS = 12V, ID = 75A _Ã
VGS(th)
gfs
IDSS
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
2.0 — 4.0 V
45 — —
S
—
—
—
—
10
25
µA
VDS = VGS, ID = 1.0mA
VDS ≥ 15V, IDS = 75A Ã
VDS = 48V ,VGS = 0V
VDS = 48V,
VGS = 0V, TJ = 125°C
— — 100
—
— -100 ^nA
VGS = 20V
VGS = -20V
— — 165
— — 55 nC
VGS =12V, ID = 45A
VDS = 30V
— — 65
— — 35
— — 125
—
— 60
ns
VDD = 30V, ID = 45A,
VGS =12V, RG = 2.35Ω
— — 50
— 4.0 — _{nH Measured from the center of}
drain pad to center of source pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 6080 —
— 2310 — pF
— 90 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode) — — 75*
A
ISM Pulse Source Current (Body Diode) À
— — 300
Test Conditions
VSD Diode Forward Voltage
trr Reverse Recovery Time
QRR Reverse Recovery Charge
— — 1.3 V
— — 200 nS
— — 538 nC
Tj = 25°C, IS = 75A, VGS = 0V Ã
Tj = 25°C, IF = 45A, di/dt ≤100A/µs
VDD ≤ 25V Ã
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max Units
Test Conditions
— — 0.5
— 1.6 — ^°C/W
soldered to a 2” square copper-clad board
Note: Corresponding Spice and Saber models are available on International Rectifier web site.
For footnotes refer to the last page
2
www.irf.com