JANSF2N7262 Datasheet, PDF (2/12 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU-HOLE

IRHF7230, JANSR2N7262
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 200
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source
—
On-State Resistance
—
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
2.5
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
Gate-to-Source Leakage Forward
—
IGSS
Gate-to-Source Leakage Reverse
—
Qg
Total Gate Charge
—
Qgs
Gate-to-Source Charge
—
Qgd
Gate-to-Drain (‘Miller’) Charge
—
td_(on)
Turn-On Delay Time
—
tr
Rise Time
—
td_(off)
Turn-Off Delay Time
—
tf
Fall Time
—
LS ₊ LD
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
——
V
0.25 — V/°C
Test Conditions
VGS =0 V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.35
— 0.36 ^Ω
VGS = 12V, ID = 3.5A
VGS = 12V, ID = 5.5A
„
— 4.0 V
— — S( )
—
—
25
250
µA
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 3.5A „
VDS= 160V,VGS=0V
VDS = 160V
VGS = 0V, TJ = 125°C
— 100
— -100 ^nA
VGS = 20V
VGS = -20V
— 50
— 10 nC
VGS = 12V, ID = 5.5A
VDS = 100V
— 25
— 25
— 40
— 60 ^ns
VDD = 100V, ID = 5.5A,
VGS = 12V, RG = 7.5Ω
— 45
7.0 —
nH ^{Measured from drain lead (6mm/0.25in. from}
package) to source lead (6mm/0.25in. from
package)
1100 —
250 — pF
55 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode) — —
ISM Pulse Source Current (Body Diode) À
——
5.5
22
A
VSD Diode Forward Voltage
— — 1.4 V
trr Reverse Recovery Time
— — 400 ns
QRR Reverse Recovery Charge
— — 3.0 µC
Tj = 25°C, IS = 5.5A, VGS = 0V Ã
Tj = 25°C, IF = 5.5A, di/dt ≤ 100A/µs
VDD ≤ 25V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
— — 5.0
— — 175 ^°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com