IRHY57133CMSE_15 Datasheet, PDF (2/8 Pages) International Rectifier – Simple Drive Requirements

IRHY57133CMSE, JANSR2N7488T3
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 130
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
VGS(th)
Gate Threshold Voltage
2.5
gfs
Forward Transconductance
8.5
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
—— V
0.16 — V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.09 Ω
VGS = 12V, ID = 12A _Ã
— 4.5 V
— — S( )
—
—
10
25
µA
— 100
— -100 ^nA
— 48
— 16 nC
— 18
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 12A Ã
VDS= 104V ,VGS=0V
VDS = 104V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 18A
VDS = 65V
— 20
— 70
— 25 ^ns
VDD = 65V, ID = 18A,
VGS =12V, RG = 7.5Ω
— 35
6.8 —
nH ^{Measured from drain lead (6mm/}
0.25in. from package) to source
lead (6mm/0.25in. from package)
965 —
300 — pF
20 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode) — — 18*
A
ISM Pulse Source Current (Body Diode) À
— — 72
Test Conditions
VSD Diode Forward Voltage
trr Reverse Recovery Time
QRR Reverse Recovery Charge
— — 1.2 V
— — 200 nS
— — 1.5 µC
Tj = 25°C, IS = 18A, VGS = 0V Ã
Tj = 25°C, IF = 18A, di/dt ≤ 100A/µs
VDD ≤ 25V Ã
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max
— — 1.67
— — 80
Units
°C/W
Test Conditions
Typical Socket Mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com