English
Language : 

IRHNJ57130 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-0.5)
IRHNJ57130, JANSR2N7481U3
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 100
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
13
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Typ Max Units
——
V
0.11 — V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.06 Ω
VGS = 12V, ID = 16A ➃
— 4.0 V
— — S( )
—
—
10
25
µA
— 100
— -100 nA
— 50
— 7.4 nC
— 20
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 16A ➃
VDS= 80V ,VGS=0V
VDS = 80V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 22A
VDS = 50V
— 25
— 100
— 35 ns
VDD = 50V, ID = 22A,
VGS =12V, RG = 7.5Ω
— 30
4.0 — nH Measured from the center of
drain pad to center of source pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 1005 —
— 365 — pF
— 50 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 22* A
ISM Pulse Source Current (Body Diode) ➀
— — 88
VSD Diode Forward Voltage
— — 1.2 V
trr Reverse Recovery Time
— — 250 ns
QRR Reverse Recovery Charge
— — 850 nC
Tj = 25°C, IS = 22A, VGS = 0V ➃
Tj = 25°C, IF = 22A, di/dt ≤100A/µs
VDD ≤ 25V ➃
ton Forward Turn-On Time
* Current is limited by package
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max Units
Test Conditions
— — 1.67
°C/W
— 6.9 —
soldered to a 2” square copper-clad board
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com