IRFB7546PBF_15 Datasheet, PDF (2/10 Pages) International Rectifier – Brushed Motor drive applications

IRFB7546PbF
Absolute Maximum Rating
Symbol
I_D @ T_C = 25°C
I_D @ T_C = 100°C
I_DM
P_D @T_C = 25°C
Parameter
Continuous Drain Current, V_GS @ 10V
Continuous Drain Current, V_GS @ 10V
Pulsed Drain Current 
Maximum Power Dissipation
Linear Derating Factor
V_GS
T_J
T_STG
Gate-to-Source Voltage
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds (1.6mm from case)
Mounting Torque, 6-32 or M3 Screw
Avalanche Characteristics
E_{AS (Thermally limited)} Single Pulse Avalanche Energy 
E_{AS (Thermally limited)} Single Pulse Avalanche Energy 
I_AR
Avalanche Current 
E_AR
Repetitive Avalanche Energy 
Thermal Resistance
Symbol
Parameter
R_JC
R_CS
R_JA
Junction-to-Case 
Case-to-Sink, Flat Greased Surface
Junction-to-Ambient 
Max.
75
53
300
99
0.7
± 20
-55 to + 175
300
10 lbf·in (1.1 N·m)
110
170
See Fig 15, 16, 23a, 23b
Typ.
–––
0.50
–––
Max.
1.52
–––
62
Units
A
W
W/°C
V
°C
mJ
A
mJ
Units
°C/W
Static @ T_J = 25°C (unless otherwise specified)
Symbol
Parameter
V_(BR)DSS
Drain-to-Source Breakdown Voltage
V_(BR)DSS/T_J Breakdown Voltage Temp. Coefficient
R_DS(on)
Static Drain-to-Source On-Resistance
V_GS(th)
Gate Threshold Voltage
I_DSS
Drain-to-Source Leakage Current
I_GSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
R_G
Gate Resistance
Min.
60
–––
–––
–––
2.1
–––
–––
–––
–––
–––
Typ.
–––
46
6.0
7.5
–––
–––
–––
–––
–––
1.6
Max.
–––
–––
7.3
–––
3.7
1.0
150
100
-100
–––
Units
Conditions
V V_GS = 0V, I_D = 250µA
mV/°C Reference to 25°C, I_D = 1mA 
m
V_GS = 10V, I_D = 45A 
V_GS = 6.0V, I_D = 23A 
V V_DS = V_GS, I_D = 100µA
µA
V_DS =60 V, V_GS = 0V
V_DS =60V,V_GS = 0V,T_J =125°C
nA
V_GS = 20V
V_GS = -20V

Notes:
 Repetitive rating; pulse width limited by max. junction temperature.
 Limited by T_Jmax, starting T_J = 25°C, L = 110µH, R_G = 50, I_AS = 45A, V_GS =10V.
 I_SD  100A, di/dt  1260A/µs, V_DD  V_(BR)DSS, T_J 175°C.
 Pulse width  400µs; duty cycle  2%.
 C_oss eff. (TR) is a fixed capacitance that gives the same charging time as C_oss while V_DS is rising from 0 to 80% V_DSS.
 C_oss eff. (ER) is a fixed capacitance that gives the same energy as C_oss while V_DS is rising from 0 to 80% V_DSS.
 R_ is measured at T_J approximately 90°C.
When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques
refer to application note #AN-994.: http://www.irf.com/technical-info/appnotes/an-994.pdf
 Limited by T_Jmax, starting T_J = 25°C, L = 1mH, R_G = 50, I_AS = 19A, V_GS =10V
2 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback
November 7, 2014