English
Language : 

IRF5Y31N20 Datasheet, PDF (2/7 Pages) International Rectifier – POWER MOSFET N-CHANNEL(Vdss=200V, Rds(on)=0.092ohm, Id=18A*)
IRF5Y31N20
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 200
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
VGS(th)
Gate Threshold Voltage
3.0
gfs
Forward Transconductance
14
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
l Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
—— V
0.27 — V/°C
Test Conditions
VGS = 0V, ID = 250µA
Reference to 25°C, ID = 1.0mA
— 0.092 Ω
VGS = 10V, ID = 14A ➃
— 5.5
——
— 25
— 250
— 100
— -100
— 100
— 32
— 46
— 30
— 148
— 50
— 27
6.8 —
2480 —
370 —
73 —
V
S( )
µA
nA
nC
ns
VDS = VGS, ID = 250µA
VDS =15V, IDS = 14A ➃
VDS = 200V ,VGS=0V
VDS = 160V,
VGS = 0V, TJ =125°C
VGS = 20V
VGS = -20V
VGS =10V, ID = 18A
VDS = 160V
VDD = 100V, ID = 18A,
VGS = 10V, RG = 2.5Ω
nH Measured from drain lead (6mm /
0.25in. from package ) to source
lead (6mm/0.25in. from pacakge
VGS = 0V, VDS = 25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 18* A
ISM Pulse Source Current (Body Diode) ➀
— — 72
VSD Diode Forward Voltage
— — 1.3 V
trr Reverse Recovery Time
— — 300 ns
QRR Reverse Recovery Charge
— — 2.3 µC
Tj = 25°C, IS = 18A, VGS = 0V ➃
Tj = 25°C, IF = 18A, di/dt ≤ 100A/µs
VDD ≤ 25V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
Junction-to-Case
Min Typ Max Units
— — 1.25 °C/W
Test Conditions
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com