IRFR3504PBF Datasheet, PDF (11/11 Pages) International Rectifier – AUTOMOTIVE MOSFET

IRFR/U3504PbF
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRR TRL
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
FEED DIRECTION
8.1 ( .318 )
7.9 ( .312 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
FEED DIRECTION
13 INCH
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature. (See fig. 11).
‚ Limited by T_Jmax, starting T_J = 25°C,
L = 0.52mH, R_G = 25Ω, I_AS = 30A, V_GS =10V.
Part not recommended for use above this
value.
ƒ I_SD ≤ 30A, di/dt ≤ 170A/µs, V_DD ≤ V_(BR)DSS,
T_J ≤ 175°C.
„ Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
16 mm
… C_oss eff. is a fixed capacitance that gives the same charging time
as C_oss while V_DS is rising from 0 to 80% V_DSS .
† Limited by T_Jmax , see Fig.12a, 12b, 15, 16 for typical repetitive
avalanche performance.
‡ This value determined from sample failure population. 100%
tested to this value in production.
ˆ When mounted on 1" square PCB ( FR-4 or G-10 Material ).
For recommended footprint and soldering techniques refer to
application note #AN-994.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Automotive [Q101] market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information.12/04
www.irf.com
11