IRF630N_04 Datasheet, PDF (11/11 Pages) International Rectifier – HEXFET Power MOSFET

IRF630N/S/L
D²Pak Tape & Reel Information
Dimensions are shown in millimeters (inches)
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
1.60 (.063)
1.50 (.059)
0.368 (.0145)
0.342 (.0135)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
TRL
10.90 (.429)
10.70 (.421)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
1.75 (.069)
1.25 (.049)
16.10 (.634)
15.90 (.626)
24.30 (.957)
23.90 (.941)
4.72 (.136)
4.52 (.178)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
Notes:
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
 Repetitive rating; pulse width limited by
max. junction temperature.
‚ Starting T_J = 25°C, L = 6.5mH
R_G = 25Ω, I_AS = 5.4A.
ƒ Pulse width ≤ 400µs; duty cycle ≤ 2%.
„ This is only applied to TO-220AB package.
… This is applied to D²Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ).
For recommended footprint and soldering techniques refer to application note #AN-994.
† I_SD ≤ 5.4A, di/dt ≤ 280A/µs, V_DD ≤ V_(BR)DSS, T_J ≤ 175°C.
TO-220AB package is not recommended for Surface Mount Application.
Data and specifications subject to change without notice.
This product has been designed and qualified for the automotive [Q101] (IRF630N)
& industrial market (IRF630NS/L).
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information. 10/04
www.irf.com
11