HIP4086_04 Datasheet, PDF (9/9 Pages) Intersil Corporation – 80V, 0.5A Three Phase Driver

Typical Performance Curves (Continued)
HIP4086
6
RDEL = 100kΩ
4
2
RDEL = 10kΩ
0
-60 -40 -20 0 20 40 60 80 100 120 140 160
JUNCTION TEMPERATURE (^oC)
FIGURE 15. DEAD TIME
11
10.5
10
9.5
ENABLE (50K, UVLO TO GND)
9
8.5
TRIP (50K, UVLO TO GND)
8
7.5 ^{TRIP/ENABLE (0K, UVLO TO VDD) ENABLE (UVLO OPEN)}
7
TRIP (UVLO OPEN)
6.5
6
-60 -40 -20 0 20 40 60 80 100 120 140 160
JUNCTION TEMPERATURE (^oC)
FIGURE 16. UNDERVOLTAGE THRESHOLD
25
V_xHS = 80V
20
15
10
-60 -40 -20 0 20 40 60 80 100 120 140 160
JUNCTION TEMPERATURE (^oC)
FIGURE 17. I_xHS LEAKAGE CURRENT
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
9