HIP4086_04 Datasheet, PDF (1/9 Pages) Intersil Corporation – 80V, 0.5A Three Phase Driver

®
Data Sheet
July 2004
HIP4086
FN4220.6
80V, 0.5A Three Phase Driver
The HIP4086 is a Three Phase Bridge N-Channel MOSFET
driver IC. The HIP4086 is specifically targeted for PWM
motor control. It makes bridge based designs simple and
flexible. Like the HIP4081, the HIP4086 has a flexible input
protocol for driving every possible switch combination. Unlike
the HIP4081, the user can override the shoot-through
protection for switched reluctance applications. The HIP4086
has reduced drive current compared to the HIP4081 (0.5A vs
2.5A) and a much wider range of programmable dead times
(0.25µs to 4.5µs) - like the HIP4082. The HIP4086 is suitable
for applications requiring DC to 100kHz. Unlike the previous
family members, the HIP4086 has a programmable
undervoltage set point.
Also refer to the HIP4083, three phase upper only MOSFET
driver, for a lower current solution optimized for smaller
motors.
Ordering Information
TEMP.
PART NUMBER RANGE (^oC)
PACKAGE
HIP4086AB*
-40 to 125 24 Ld SOIC
HIP4086ABZ*
(See Note)
-40 to 125 24 Ld SOIC
(Pb-free)
HIP4086AP
-40 to 125 24 Ld PDIP
HIP4086APZ
(See Note)
-40 to 125 24 Ld PDIP
(Pb-free)
*Add “-T” suffix to part number for tape and reel packaging.
PKG.
DWG. #
M24.3
M24.3
E24.3
E24.3
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish, which
is compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J Std-020B.
Pinout
HIP4086
(PDIP, SOIC)
TOP VIEW
BHB 1
BHI 2
BLI 3
ALI 4
AHI 5
V_SS 6
RDEL 7
UVLO 8
RFSH 9
DIS 10
CLI 11
CHI 12
24 BHO
23 BHS
22 BLO
21 ALO
20 V_DD
19 CLO
18 AHS
17 AHO
16 AHB
15 CHS
14 CHO
13 CHB
Features
• Independently Drives 6 N-Channel MOSFETs in Three
Phase Bridge Configuration
• Bootstrap Supply Max Voltage to 95VDC
• Bias Supply Operation from 7V to 15V
• 1.25A Peak Turn-Off Current
• User-Programmable Dead Time (0.25µs to 4.5µs)
• Charge-Pump and Bootstrap Maintain Upper Bias
Supplies
• Programmable Bootstrap Refresh Time
• Drives 1000pF Load with Typical Rise Time of 20ns and
Fall Time of 10ns
• DIS (Disable) Overrides Input Control
• Input Logic Thresholds Compatible with 5V to 15V Logic
Levels
• Dead Time Disable Capability
• Programmable Undervoltage Set Point
• Pb-free available
Applications
• Brushless Motors
• AC Motor Drives
• Switched Reluctance Motor Drives
• Battery Powered Vehicles
Application Block Diagram
80V
12V
HIP4086
GND
GND
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.