ISL76322 Datasheet, PDF (8/13 Pages) Intersil Corporation – 16-Bit Long-Reach Video Automotive Grade SERDES

ISL76322
Electrical Specifications Unless otherwise indicated, all data is for: VDD_CDR = VDD_CR = 1.8V, VDD_IO = 3.3V_,
VDD_TX = VDD_P = VDD_AN = 3.3V, T_A = +25°C, Ref_Res = 3.16kΩ, High-speed AC-coupling capacitor = 27nF. Boldface limits apply over the operating
temperature range, -40°C to +105°C. (Continued)
PARAMETER
SYMBOL
CONDITIONS
MIN
MAX
(Note 10) TYP (Note 10) UNITS
HIGH SPEED RECEIVER
HS Differential Input Voltage
HS Generated Input Common Mode Voltage
HS Differential Input Impedance
HS Maximum Jitter Tolerance
I²C
I²C Clock Rate (on SCL)
I²C Clock Pulse Width (HI or LO)
I²C Clock Low to Data Out Valid
I²C Start/Stop Setup/Hold Time
I²C Data in Setup Time
I²C Data in Hold Time
I²C Data out Hold Time
V_ID
V_ICM
R_IN
f_I2C
75
2.32
mV_P-P
V
80 100 120
Ω
0.50
UI_P-P
100 400 kHz
1.3
µs
0
1
µs
0.6
µs
100
ns
100
ns
100
ms
NOTES:
8. IDDIO is nominally 50µA and not included in this total as it is dominated by the loading of the parallel pins.
9. This parameter is the output data skew from the invalid edge of PCLK_OUT. The setup and hold time provided to a system is dependent on the PCLK
frequency and is calculated as follows: 0.5 * f_IN - t_DV..
10. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
8
January 31, 2011
FN7611.0