ISL33334E Datasheet, PDF (8/23 Pages) Intersil Corporation – Operates from a single 3.3V supply

ISL33334E, ISL33337E
Electrical Specifications Test Conditions: V_CC = 3.15V to 3.45V, C₁ - C₄ = 0.1µF; unless otherwise specified. Typicals are at V_CC = 3.3V,
T_A = +25°C (Note 10). (Continued)Boldface limits apply across the operating temperature range, -40°C to +85°C. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
TEMP MIN
MAX
(°C) (Note 14) TYP (Note 14) UNIT
Receiver Propagation Delay Skew
t_RSKEW t_RPHL - t_RPLH (Figure 8)
Full
-
18
Receiver Maximum Data Rate
DR_R C_L = 15pF
Full
0.46
2
RS-485 DRIVER SWITCHING CHARACTERISTICS (FAST DATA RATE (20Mbps), PORT 2, (SLOW485 = V_CC))
Driver Differential Input to Output
Delay
t_DLH, t_DHL R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full
10
20
40
ns
-
Mbps
35
ns
Driver Output Skew
t_SKEW R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full
-
Driver Differential Rise or Fall Time t_R, t_F R_DIFF = 54Ω, C_L = 100pF, (Figure 3)
Full
3
Driver Enable to Output Low
t_ZL
C_L = 100pF, SW = V_CC (Figure 4)
Full
-
Driver Enable to Output High
t_ZH C_L = 100pF, SW = GND (Figure 4)
Full
-
Driver Disable from Output Low
t_LZ
C_L = 15pF, SW = V_CC (Figure 4)
Full
-
Driver Disable from Output High
t_HZ C_L = 15pF, SW = GND Figure 4)
Full
-
Driver Enable from Shutdown to
t_ZL(SHDN) R_L = 500Ω, C_L = 100pF, SW = V_CC (Figure 4)
Full
-
Output Low
2
10
ns
20
30
ns
28
60
ns
35
60
ns
30
60
ns
30
60
ns
100
250
ns
Driver Enable from Shutdown to
t_ZH(SHDN) R_L = 500Ω, C_L = 100pF, SW = GND (Figure 4)
Full
-
Output High
290
375
ns
Driver Maximum Data Rate
f_MAX R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full
20
35
RS-485 DRIVER SWITCHING CHARACTERISTICS (SLOW DATA RATE (115kbps), PORT 2, (SLOW485 = GND))
-
Mbps
Driver Differential Input to Output
Delay
t_DLH, t_DHL R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full
800
1600 2500
ns
Driver Output Skew
t_SKEW R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full
-
250
500
ns
Driver Differential Rise or Fall Time t_R, t_F R_DIFF = 54Ω, C_L = 100pF (Figure 3)
Full 1000 1700 3100
ns
Driver Enable to Output Low
t_ZL
C_L = 100pF, SW = V_CC (Figure 4)
Full
-
45
100
ns
Driver Enable to Output High
t_ZH C_L = 100pF, SW = GND (Figure 4)
Full
-
900
1200
ns
Driver Disable from Output Low
t_LZ
C_L = 15pF, SW = V_CC (Figure 4)
Full
-
35
60
ns
Driver Disable from Output High
t_HZ C_L = 15pF, SW = GND (Figure 4)
Full
-
25
60
ns
Driver Enable from Shutdown to
t_ZL(SHDN) R_L = 500Ω, C_L = 100pF, SW = V_CC (Figure 4)
Full
-
Output Low
-
800
ns
Driver Enable from Shutdown to
t_ZH(SHDN) R_L = 500Ω, C_L = 100pF, SW = GND (Figure 4)
Full
-
Output High
-
1500
ns
Driver Maximum Data Rate
f_MAX R_DIFF = 54Ω, C_L = 100pF (Figure 3)
RS-485 RECEIVER SWITCHING CHARACTERISTICS (PORT 2, ALL SPEEDS)
Full
115
800
-
kbps
Receiver Input to Output Delay
Receiver Skew | t_PLH - t_PHL |
Receiver Maximum Data Rate
Receiver Enable to Output Low
Receiver Enable to Output High
Receiver Disable from Output Low
Receiver Disable from Output High
Receiver Enable from Shutdown to
Output Low
t_PLH, t_PHL (Figure 5)
t_SKEW (Figure 5)
f_MAX
t_ZL
C_L = 15pF, SW = V_CC (Figure 6)
t_ZH C_L = 15pF, SW = GND (Figure 6)
t_LZ
C_L = 15pF, SW = V_CC (Figure 6)
t_HZ C_L = 15pF, SW = GND (Figure 6)
t_ZLSHDN C_L = 15pF, SW = V_CC (Figure 6)
Full
20
Full
-
Full
20
Full
-
Full
-
Full
-
Full
-
Full
-
45
70
ns
3
10
ns
40
-
Mbps
20
60
ns
20
60
ns
20
60
ns
20
60
ns
500
900
ns
Receiver Enable from Shutdown to t_ZHSHDN C_L = 15pF, SW = GND (Figure 6)
Output High
Full
-
500
900
ns
Submit Document Feedback
8
FN8776.1
October 21, 2016