English
Language : 

CD40107BMS Datasheet, PDF (7/7 Pages) Intersil Corporation – CMOS Dual 2 Input NAND Buffer/Driver
◁
CD40107BMS
Typical Performance Characteristics (Continued)
105 8
6
AMBIENT TEMPERATURE (TA) = +25oC
4
2 SUPPLY VOLTAGE (VDD) = 15V
104 8
6
4
5V
2
103 8
10V
6
4
2
102 8
6
4
2
CL = 50pF
CL = 15pF
101
2 4 68 2 4 68 2 4 68 2 4 68 2 4 68
100
101
102
103
104
105
INPUT FREQUENCY (fI) (kHz)
FIGURE 6. TYPICAL POWER DISSIPATION AS A FUNCTION OF INPUT FREQUENCY
Chip Dimensions and Pad Layout
NOTE:
Numbers inside pads for CD40107BE not offered as standard
part.
Numbers outside chip are for CD40107BF
Dimensions in parenthesis are in millimeters and are derived
from the basic inch dimensions as indicated. Grid graduations
are in mils (10-3 inch).
METALLIZATION: Thickness: 11kÅ − 14kÅ, AL.
PASSIVATION: 10.4kÅ - 15.6kÅ, Silane
BOND PADS: 0.004 inches X 0.004 inches MIN
DIE THICKNESS: 0.0198 inches - 0.0218 inches
Special Considerations
Limiting Capacitive Currents for CL > 500pF, VDD > 15V Driving Inductive Loads
For VDD > 15V, and load capacitance (CL) from output to
ground > 500pF, an external 25Ω series limiting resistor
should be inserted between the output terminal and CL. No
external resistor is necessary if CL < 500pF or VDD < 15V.
When using the CD40107BMS to drive inductive loads, the
load should be shunted with a diode to prevent high voltages
from developing across the CD40107BMS output.
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
24