ISL6612A_14 Datasheet, PDF (5/12 Pages) Intersil Corporation – Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP

ISL6612A, ISL6613A
Absolute Maximum Ratings
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (V_BOOT-GND) . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V
Input Voltage (V_PWM). . . . . . . . . . . . . . . . . . . . . . .GND - 0.3V to 7V
UGATE . . . . . . . . . . . . . . . . . . . V_PHASE - 0.3V_DC to V_BOOT + 0.3V
V_PHASE - 3.5V (<100ns Pulse Width, 2µJ) to V_BOOT + 0.3V
LGATE . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V_DC to V_PVCC + 0.3V
GND - 5V (<100ns Pulse Width, 2µJ) to V_PVCC + 0.3V
PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V_DC to 24V_DC
GND - 8V (<400ns, 20µJ) to 31V (<200ns, V_BOOT-GND<36V)
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . .Class I JEDEC STD
Thermal Information
Thermal Resistance
θ_JA (°C/W) θ_JC (°C/W)
SOIC Package (Note 1) . . . . . . . . . . . . 100
N/A
EPSOIC Package (Notes 2, 3) . . . . . .
50
7
DFN Package (Notes 2, 3). . . . . . . . . .
48
7
Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C
Maximum Storage Temperature Range. . . . . . . . . . -65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . +300°C
(SOIC - Lead Tips Only)
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . -40°C to +85°C
Maximum Operating Junction Temperature . . . . . . . . . . . . +125°C
Supply Voltage, VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V ±10%
Supply Voltage Range, PVCC . . . . . . . . . . . . . . . . 5V to 12V ±10%
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air.
5. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
6. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 8) TYP (Note 8) UNITS
VCC SUPPLY CURRENT
Bias Supply Current
Gate Drive Bias Current
POWER-ON RESET AND ENABLE
I_VCC
ISL6612A, f_PWM = 300kHz, V_VCC = 12V
-
7.2
-
mA
ISL6613A, f_PWM = 300kHz, V_VCC = 12V
-
4.5
-
mA
I_VCC
ISL6612A, f_PWM = 1MHz, V_VCC = 12V
-
11
-
mA
ISL6613A, f_PWM = 1MHz, V_VCC = 12V
-
5
-
mA
I_PVCC ISL6612A, f_PWM = 300kHz, V_PVCC = 12V
-
2.5
-
mA
ISL6613A, f_PWM = 300kHz, V_PVCC = 12V
-
5.2
-
mA
I_PVCC ISL6612A, f_PWM = 1MHz, V_PVCC = 12V
-
7
-
mA
ISL6613A, f_PWM = 1MHz, V_PVCC = 12V
-
13
-
mA
VCC Rising Threshold
VCC Rising Threshold
VCC Falling Threshold
VCC Falling Threshold
PWM INPUT (See “TIMING DIAGRAM” on page 7.)
T_A = 0°C to +85°C
T_A = -40°C to +85°C
T_A = 0°C to +85°C
T_A = -40°C to +85°C
9.35 9.80 10.00
V
8.35 9.80 10.00
V
7.35 7.60 8.00
V
6.35 7.60 8.00
V
Input Current
PWM Rising Threshold
I_PWM
V_PWM = 5V
V_PWM = 0V
VCC = 12V
-
450
-
µA
-
-400
-
µA
-
3.00
-
V
PWM Falling Threshold
VCC = 12V
-
2.00
-
V
Typical Three-State Shutdown Window
VCC = 12V
1.80
-
2.40
V
Three-State Lower Gate Falling Threshold
VCC = 12V
-
1.50
-
V
Three-State Lower Gate Rising Threshold
VCC = 12V
-
1.00
-
V
Three-State Upper Gate Rising Threshold
VCC = 12V
-
3.20
-
V
5
FN9159.7
May 1, 2012