English
Language : 

ISL54217_14 Datasheet, PDF (5/24 Pages) Intersil Corporation – USB 2.0 High-Speed x 2 Channels/Stereo Audio Dual SP3T (Dual 3-to-1 Multiplexer)
◁
ISL54217
Electrical Specifications - 2.7V to 3.6V Supply Test Conditions: VDD = +3.0V, GND = 0V, VC0H, VC1H = 1.4V, VC0L,
VC1L= 0.5V, (Note 11), Unless Otherwise Specified.
Boldface limits apply over the operating temperature range,
-40°C to +85°C. (Continued)
PARAMETER
TEST CONDITIONS
MIN
MAX
TEMP (Notes
(Notes
(°C) 12, 13) TYP 12, 13) UNITS
ON-Resistance, rON
VDD = 2.7V, USB1 mode (C0 = 0.5V, C1 = 1.4V) or 25
-
6.2
8
Ω
USB2 Mode (C0 = 1.4V, C1 = 0.5V), ICOMx = 40mA,
VD+ or VD = 0V to 400mV (see Figure 4, Note 15)
Full
-
-
10
Ω
rON Matching Between Channels, VDD = 2.7V, USB1 mode (C0 = 0.5V, C1 = 1.4V) or 25
- 0.08 0.5
Ω
ΔrON
USB2 Mode (C0 = 1.4V, C1 = 0.5V), ICOMx = 40mA,
VD+ or VD-= Voltage at max rON, (Notes 15, 16)
Full
-
- 0.55
Ω
rON Flatness, RFLAT(ON)
VDD = 2.7V, USB1 mode (C0 = 0.5V, C1 = 1.4V) or 25
- 0.26 1
Ω
USB2 Mode (C0 = 1.4V, C1 = 0.5V), ICOMx = 40mA,
VD+ or VD-= 0V to 400mV, (Notes 14, 15)
Full
-
-
1.2
Ω
ON-Resistance, rON
VDD = 3.3V, USB1 mode (C0 = 0.5V, C1 = 1.4V) or +25
-
9.8 20
Ω
USB2 Mode (C0 = 1.4V, C1 = 0.5V), ICOMx = 40mA,
VD+ or VD- = 3.3V (see Figure 4, Note 15)
Full
-
-
25
Ω
OFF Leakage Current, ID+(OFF) or VDD = 3.6V, All OFF Mode (C0 = 0.5V, C1 = 0.5V),
25 -15 0.11 15
nA
ID-(OFF)
VCOM- or VCOM+ = 0.5V, 0V, VD+ or VD- = 0V, 0.5V,
L = R = float
Full
-20
-
20
nA
ON Leakage Current, IDX
VDD = 3.3V, USB1 mode (C0 = 0.5V, C1 = 1.4V) or
25
-20 2.4
20
nA
USB2 Mode (C0 = 1.4V, C1 = 0.5V), VD+ or
VD- = 2.7V, COM- = COM+ = Float, L and R = float
Full -25
-
25
nA
DPDT DYNAMIC CHARACTERISTICS
ALL OFF to USB or USB to All OFF VDD = 2.7V, RL = 50Ω, CL = 10pF, (see Figure 1)
25
-
175
-
ns
Address Transition Time, tTRANS
Audio to USB1 Address Transition VDD = 2.7V, RL = 50Ω, CL = 10pF, (see Figure 1)
25
-
12
-
µs
Time, tTRANS
Break-Before-Make Time Delay, tD VDD = 3.6V, RL = 50Ω, CL = 10pF, (see Figure 2)
25
-
52
-
ns
Skew, (tSKEWOUT - tSKEWIN)
VDD = 3.0V, USB1 mode (C0 = 0V, C1 = VDD) or USB2 25
-
75
-
ps
Mode (C0 = VDD, C1 = 0V), RL = 45Ω, CL = 10pF,
tR = tF = 500ps at 480Mbps, (Duty Cycle = 50%)
(see Figure 7)
Total Jitter, tJ
Rise/Fall Degradation
(Propagation Delay), tPD
VDD =3.0V, USB1 mode (C0 = 0V, C1 = VDD) or USB2 25
-
210
-
ps
Mode (C0 = VDD, C1 = 0V), RL = 45Ω, CL = 10pF,
tR = tF = 500ps at 480Mbps
VDD = 3.0V, USB1 mode (C0 = 0V, C1 = VDD) or USB2 25
-
250
-
ps
Mode (C0 = VDD, C1 = 0V), RL = 45Ω, CL = 10pF,
(see Figure 7)
Audio Crosstalk
R to COM-, L to COM+
VDD = 3.0V, Audio Mode (C0 = VDD, C1 = VDD),
25
-
-88
-
dB
RL = 32Ω, f = 20Hz to 20kHz, VR or VL = 0.707VRMS,
(see Figure 6)
Crosstalk
(Audio to USB, USB to Audio)
VDD = 3.0V, RL = 50Ω, f = 100kHz
25
-
-98
-
dB
OFF-Isolation
Audio OFF-Isolation
(All OFF Mode)
VDD = 3.0V, RL = 50Ω, f = 100kHz
25
-
95.5
-
dB
VDD = 3.0V, C0 = 0V, C1 = 0V, RL = 32Ω, f = 20Hz to 25
-
115
-
dB
20kHz
Audio OFF-Isolation
(Mute Mode)
VDD = 3.0V, C1 = VDD , C0 = 0V, RL = 32Ω, f = 20Hz 25
-
105
-
dB
to 20kHz
Audio OFF-Isolation
(Mute Mode)
VDD = 3.0V, C1 = VDD , C0 = 0V, RL = 20kΩ, f = 20Hz 25
-
77
-
dB
to 20kHz
5
FN6817.4
June 17, 2010
 ▷