ISL24202_14 Datasheet, PDF (5/12 Pages) Intersil Corporation – Programmable VCOM Calibrator with EEPROM

ISL24202
Electrical Specifications Test Conditions: V_DD = 3.3V, AV_DD = 18V, R_SET = 5kΩ, R₁ = 10kΩ, R₂ = 10kΩ, (See Figure 5). Typicals are at
T_A = +25°C. Boldface limits apply over the operating temperature range, -40°C to +85°C. (Continued)
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
(Note 6)
MAX
TYP (Note 6) UNITS
t_{H_REJ} CTL High Pulse Rejection Width
20
µs
t_{L_REJ} CTL Low Pulse Rejection Width
20
µs
t_{H_MIN} CTL High Minimum Valid Pulse Width
200
µs
t_{L_MIN} CTL Low Minimum Valid Pulse Width
200
µs
t_MTC CTL Minimum Time Between Counts
10
µs
V_PROG CTL EEPROM Program Voltage (see Figure 9)
4.9
19
V
t_PROG CTL EEPROM Programming Signal Time
200
µs
t_{H_PROP} CTL High-to-Mid to OUT Propagation Time
65
µs
t_{L_PROP} CTL Low-to-Mid to OUT Propagation Time
65
µs
NOTE:
6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
5
FN7587.0
March 15, 2011