HI1386_03 Datasheet, PDF (5/7 Pages) Intersil Corporation – 8-Bit, 75 MSPS, Flash A/D Converter

HI1386
Absolute Maximum Ratings T_A = 25^oC
Supply Voltage (AV_EE, DV_EE) . . . . . . . . . . . . . . . . . . . -7V to +0.5V
Analog Input Voltage (V_IN) . . . . . . . . . . . . . . . . . . . . . -2.7V to +0.5V
Reference Input Voltage
V_RT, V_RB, V_RM . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.7V to +0.5V
|V_RT -V_RB| . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5V
Digital Input Voltage
CLK, CLK, MINV, LINV . . . . . . . . . . . . . . . . . . . . . . . -4V to +0.5V
|CLK-CLK | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7V
V_RM Pin Input Current (I_VRM) . . . . . . . . . . . . . . . . . . -3mA to +3mA
Digital Output Current (ID0 to ID7) . . . . . . . . . . . . . . . -30mA to 0mA
Operating Conditions
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JAoC/W θ_JCoC/W
PDIP Package . . . . . . . . . . . . . . . . . . .
58
N/A
CLCC Package . . . . . . . . . . . . . . . . . .
45
11
Maximum Junction Temperature
CLCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175^oC
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150^oC
Maximum Storage Temperature Range (T_STG) . . . .-65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s). . . . . . . . . . . . 300^oC
Temperature Ranges (Note 4)
PDIP Package (T_A). . . . . . . . . . . . . . . . . . . . . . . . . -20^oC to 75^oC
CLCC Package (T_C) . . . . . . . . . . . . . . . . . . . . . . . -20^oC to100^oC
Supply Voltage
AV_EE, DV_EE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -5.5V to -4.95V
AV_EE - DV_EE . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.05V to 0.05V
AGND - DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.05V to 0.05V
Reference Input Voltage
V_RT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.1V to 0.1V
V_RB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.2V to -1.8V
Analog Input Voltage, V_IN . . . . . . . . . . . . . . . . . . . . . . . . V_RB to V_RT
Pulse Width of Clock
t_PW1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6ns (Min)
t_PW0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6ns (Min)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ_JA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications T_A = 25^oC, AV_EE = DV_EE = -5.2V, V_RT = 0V, V_RB = -2V (Note 1)
PARAMETER
TEST CONDITIONS
MIN
TYP
SYSTEM PERFORMANCE
Resolution
-
8
Integral Linearity Error, INL
Differential Linearity Error, DNL
DYNAMIC CHARACTERISTICS
f_C = 75MHz
f_C = 75MHz
-
±0.3
-
±0.3
Signal to Noise and Distortion Ratio, SINAD
= ------------------^R----^M-----^S------^S----ⁱ-^g---ⁿ----^a---^l-----------------
RMS Noise + Distortion
Input = 1MHz, Full Scale
f_C = 75MHz
Input = 18.75MHz, Full Scale
f_C = 75MHz
Error Rate
Input = 18.749MHz, Full Scale
Error > 16 LSB, f_C = 75MHz
Differential Gain Error, DG
Differential Phase Error, DP
NTSC 40 IRE Mod. Ramp,
f_C = 75 MSPS
Maximum Conversion Rate, f_C
Error Rate of 10^-9 TPS (Note 2)
Aperture Jitter, t_AJ
Sampling Delay, t_DS
ANALOG INPUT
-
46
-
40
-
-
-
1.0
-
0.5
75
-
-
10
-
3.0
Input Bandwidth
Analog Input Capacitance, C_IN
Analog Input Resistance, R_IN
Input Bias Current, I_IN
REFERENCE INPUTS
V_IN = 2V_P-P (-3dB)
V_IN = 1V + 0.07V_RMS
V_IN = -1V
150
-
-
17
-
390
-
-
Reference Resistance, R_REF
75
110
MAX
UNIT
-
Bits
±0.5
LSB
±0.5
LSB
-
dB
-
dB
10^-9
TPS
(Note 2)
-
%
-
Degree
-
MSPS
-
ps
-
ns
-
MHz
-
pF
-
kΩ
200
µA
155
Ω
5