English
Language : 

HD-4702_06 Datasheet, PDF (5/8 Pages) Intersil Corporation – CMOS Programmable Bit Rate Generator
HD-4702
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8.0V
Input, Output or I/O Voltage . . . . . . . . . . . . GND -0.5V to VCC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Typical Derating Factor . . . . . . . . . . . 1mA/MHz Increase in ICCOP
Thermal Information
Thermal Resistance (Typical)
CERDIP Package. . . . . . . . . . . . . . .
θJA
78oC/W
θJC
23oC/W
PDIP Package . . . . . . . . . . . . . . . . .
90oC/W
N/A
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
Maximum Junction Temperature
Ceramic Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+175oC
Plastic Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . .+300oC
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .720 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Voltage Range. . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range
HD-4702-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to +85oC
HD-4702-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC
Electrical Specifications
VCC = 5V ±10%, TA = -40oC to +85oC (HD-4702-9), TA = -55oC to +125oC (HD-4702-8)
LIMITS
SYMBOL
PARAMETER
MIN
MAX
UNITS
TEST CONDITIONS
VIH
VIL
VOH1
VOL1
IIH
IILX
IIL
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
Input High Current
Input Low Current
(lX Input)
Input Low Current
(All Other Inputs)
VCC 70%
-
VCC -0.1
-
-1
-1
-
VCC 30%
-
0.1
+1
+1
-
-100
V
VCC = 4.5V
V
VCC = 4.5V
V
IOH ≤ -1μA, VCC = 4.5V, (Note 1)
V
IOL ≤ +1μA, VCC = 4.5V, (Note 1)
μA
VIN = VCC, All 0ther Pins = 0V, VCC = 5.5V
μA
VIN = 0V, All Other Pins = VCC, VCC = 5.5V
μA
VIN = 0V, All Other Pins = VCC, VCC = 5.5V
(Note 2)
IOHX
IOH1
IOH2
IOLX
IOL
ICC
Output High Current
(OX)
Output High Current
(All Other Outputs)
Output High Current
(All Other Outputs)
Output Low Current
(OX)
Output Low Current
(All Other Outputs)
Supply Current
(Static)
-0.1
-
mA
VOUT = VCC - 0.5, VCC = 4.5V, Input at 0V
or VCC per Logic Function or Truth Table
-1.0
-
mA
VOUT = 2.5V, VCC = 4.5V, Input at 0V
or VCC per Logic Function or Truth Table
-0.3
-
mA
VOUT = VCC -0.5, VCC = 4.5V, Input at 0V
or VCC per Logic Function or Truth Table
0.1
-
mA
VOUT = 0.4V, VCC = 4.5V, Input at 0V
or VCC per Logic Function or Truth Table
1.6
-
mA
VOUT = 0.4V, VCC = 4.5V Input, at 0V
or VCC per Logic Function or Truth Table
-
1500
μA
ECP = VCC, CP = 0V, VCC = 5.5V,
All Other Inputs = GND, (Note 2)
-
1000
μA
ECP = VCC, CP = 0V, VCC = 5.5V,
All Other Inputs = VCC, (Note 2)
NOTES:
1. Interchanging of force and sense conditions is permitted.
2. Input Current and Quiescent Power Supply Current are relatively higher for this device because of active pull-up circuits on all inputs
except IX.
5
FN2954.2
August 24, 2006