CD4094BMS Datasheet, PDF (5/11 Pages) Intersil Corporation – CMOS 8-Stage Shift-and-Store Bus Register

Specifications CD4094BMS
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
LIMITS
PARAMETER
Minimum Strobe Pulse
Width
Input Capacitance
SYMBOL
CONDITIONS
TW VDD = 5V
VDD = 10V
VDD = 15V
CIN Any Input
NOTES
1, 2, 3
1, 2, 3
1, 2, 3
1, 2
TEMPERATURE MIN
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
MAX
200
80
70
7.5
UNITS
ns
ns
ns
pF
NOTES:
1. All voltages referenced to device GND.
2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized
on initial design release and upon design changes which would affect these characteristics.
3. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
4. CL = 50pF, RL = 1K, Input TR, TF < 20ns.
5. If more than one unit is cascaded, TRCL should be made less than or equal to the sumof the transition time and the fixed propagation
delay of the output of the driving stage for the estimated capacitive load.
TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Supply Current
N Threshold Voltage
N Threshold Voltage
Delta
P Threshold Voltage
P Threshold Voltage
Delta
Functional
Propagation Delay Time
SYMBOL
CONDITIONS
IDD VDD = 20V, VIN = VDD or GND
VNTH VDD = 10V, ISS = -10µA
∆VTN VDD = 10V, ISS = -10µA
VTP
∆VTP
VSS = 0V, IDD = 10µA
VSS = 0V, IDD = 10µA
F
TPHL
TPLH
VDD = 18V, VIN = VDD or GND
VDD = 3V, VIN = VDD or GND
VDD = 5V
NOTES: 1. All voltages referenced to device GND.
2. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
NOTES
1, 4
1, 4
1, 4
TEMPERATURE MIN
+25^oC
-
+25^oC
-2.8
+25^oC
-
1, 4
+25^oC
0.2
1, 4
+25^oC
-
1
1, 2, 3, 4
+25^oC
+25^oC
VOH >
VDD/2
-
3. See Table 2 for +25^oC limit.
4. Read and Record
MAX
25
-0.2
±1
2.8
±1
VOL <
VDD/2
1.35 x
+25^oC
Limit
UNITS
µA
V
V
V
V
V
ns
TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25^oC
PARAMETER
SYMBOL
DELTA LIMIT
Supply Current - MSI-2
Output Current (Sink)
Output Current (Source)
IDD
IOL5
IOH5A
± 1.0µA
± 20% x Pre-Test Reading
± 20% x Pre-Test Reading
CONFORMANCE GROUP
Initial Test (Pre Burn-In)
TABLE 6. APPLICABLE SUBGROUPS
MIL-STD-883
METHOD
GROUP A SUBGROUPS
100% 5004
1, 7, 9
READ AND RECORD
IDD, IOL5, IOH5A
7-1087