ISL6140_14 Datasheet, PDF (4/19 Pages) Intersil Corporation – Negative Voltage Hot Plug Controller

ISL6140, ISL6150
.
Absolute Maximum Ratings
Supply Voltage (V_DD to V_EE) . . . . . . . . . . . . . -0.3V to 100V
DRAIN, PWRGD, PWRGD Voltage . . . . . . . . . . -0.3V to 100V
UV, OV Input Voltage . . . . . . . . . . . . . . . . . . . -0.3V to 60V
SENSE, GATE Voltage . . . . . . . . . . . . . . . . . . . -0.3V to 20V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7 . . .2000V
Thermal Information
Thermal Resistance (Typical, Note 4)
θ_JA (°C/W)
8 Lead SOIC . . . . . . . . . . . . . . . . . . . . . . .
95
Maximum Junction Temperature (Plastic Package) . . +150°C
Maximum Storage Temperature Range . . . -65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range (Industrial) . . . . . . . . . . -40°C to +85°C
Temperature Range (Commercial) . . . . . . . . . 0°C to +70°C
Supply Voltage Range (Typical) . . . . . . . . . . . 36V to +72V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief
TB379 for details.
Electrical Specifications
V_DD = +48V, VEE = +0V Unless Otherwise Specified. All tests are over the full temperature
range; either Commercial (0°C to +70°C) or Industrial (-40°C to +85°C). Typical specs are
at +25°C. Boldface limits apply over the operating temperature range, -40°C to
+85°C.
PARAMETER
SYMBOL
TEST
CONDITIONS
PART NUMBER
TEST
OR GRADE
LEVEL OR MIN
MAX
NOTES (Note 7) TYP (Note 7) UNITS
DC PARAMETRIC
Supply Operating Range
Supply Current
GATE PIN
V_DD
I_DD
UV = 3V; OV = V_EE;
SENSE = V_EE; V_DD = 80V
10
-
80
V
0.6
0.9
1.3
mA
Gate Pin Pull-Up Current
Gate Pin Pull-Down Current
I_PU Gate Drive on, V_{GATE =} V_EE
I_PD Gate Drive off; any fault
condition
-30
-45
-60
µA
24
32
70
mA
External Gate Drive
SENSE PIN
Δ-V_GATE (V_{GATE -} V_EE), 17V ≤ V_DD ≤ 80V
(V_{GATE -} V_EE), 10V ≤ V_DD ≤ 17V
5
10
14
15
V
5.4
6.2
15
V
Circuit Breaker Trip Voltage
SENSE Pin Current
UV PIN
V_CB
I_SENSE
V_CB = (V_SENSE - V_EE)
V_SENSE = 50mV
40
50
60
mV
-
0
-0.5
µA
UV Pin High Threshold Voltage
UV Pin Low Threshold Voltage
UV Pin Hysteresis
UV Pin Input Current
OV PIN
V_UVH
V_UVL
V_UVHY
I_INUV
UV Low to High Transition
UV High to Low Transition
V_UV = V_EE
1.213 1.243 1.272
V
1.198 1.223 1.247
V
7
20
50
mV
-
-0.05 -0.5
µA
OV Pin High Threshold Voltage
OV Pin Low Threshold Voltage
OV Pin Hysteresis
OV Pin Input Current
V_OVH
V_OVL
V_OVHY
I_INOV
OV Low to High Transition
OV High to Low Transition
V_OV = V_EE
1.198 1.223 1.247
V
1.165 1.203 1.232
V
7
20
50
mV
-
-0.05 -0.5
µA
4
FN9039.4