ISL29018_14 Datasheet, PDF (4/19 Pages) Intersil Corporation – Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function

ISL29018
Absolute Maximum Ratings (T_A = +25°C)
V_{SUP(VDDD,VDDA)} Supply Voltage between V_DD and GND . . . . . . . . . . . . 4V
V_DDA Supply Voltage between V_DDA and GND . . . . . . . . . . . . VDDD ± 0.5V
I²C Bus (SCL, SDA) and INT Pin Voltage . . . . . . . . . . . . . . . . . . . -0.2V to 4V
I²C Bus (SCL, SDA) and INT Pin Current . . . . . . . . . . . . . . . . . . . . . . <10mA
IRDR Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.2V to V_DD + 0.5V
R_EXT Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.2V to V_DD + 0.5V
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical, Note 4)
θ_JA (°C/W)
8 Ld ODFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTE:
4. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise
noted, all tests are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V_{SUP(VDDD,VDDA)} = 3V, T_A = +25°C, R_EXT = 499kΩ 1% tolerance, 16-bit ADC operation, unless otherwise
specified.
PARAMETER
DESCRIPTION
CONDITION
MIN
MAX
(Note 9) TYP (Note 9) UNIT
V_SUP
SR_V_DD
I_SUP(OFF)
I_SUP(ON)
Power Supply Range for VDDD, V_DDA
Required Input Power-up Slew Rate
Supply Current when Powered Down
Supply Current of Ambient Light and IR
Sensing
(Note 5)
VDD rising edge between 0.4V and 2.25V
Software disabled or auto power-down
2.25
3.63
V
0.5
V/ms
0.1
0.5
µA
70
90
µA
f_OSC
t_int
F_I2C
DATA_0
Internal Oscillator Frequency
ADC Integration/Conversion Time
I²C Clock Rate Range
Count Output When Dark
16-bit ADC data
E = 0 lux
675
750
825
90
1 to 400
1
5
kHz
ms
kHz
Counts
DATA_FS Full Scale ADC Code
65535 Counts
ΔDATA
DATA
Count Output Variation Over Three Light
Sources: Fluorescent, Incandescent and
Sunlight
Ambient light sensing
±10
%
DATA_1
Light Count Output With LSB of
0.015 lux/count
E = 300 lux, Fluorescent light (Note 6),
Ambient light sensing, Range 1 (1k lux)
15000 20000 25000 Counts
DATA_2
Light Count Output With LSB of
0.06 lux/count
E = 300 lux, Fluorescent light (Note 6),
Ambient light sensing, Range 2 (4k lux)
5000
Counts
DATA_3
Light Count Output With LSB of
0.24 lux/count
E = 300 lux, Fluorescent light (Note 6),
Ambient light sensing, Range 3 (16k lux)
1250
Counts
DATA_4
Light Count Output With LSB of
0.96 lux/count
E = 300 lux, Fluorescent light (Note 6),
Ambient light sensing, Range 4 (64k lux)
312
Counts
DATA_IR1 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing,
Range 1
15000 20000 25000 Counts
DATA_IR2 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing,
Range 2
5000
Counts
DATA_IR3 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing,
Range 3
1250
Counts
DATA_IR4 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing,
Range 4
312
Counts
4
FN6619.4
October 8, 2012