ISL28134IBZ Datasheet, PDF (4/25 Pages) Intersil Corporation – 5V Ultra Low Noise, Zero Drift Rail-to-Rail Precision Op Amp

ISL28134
Absolute Maximum Ratings
Max Supply Voltage V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5V
Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . (V- - 0.3V) to (V+ + 0.3V) V
Max Input Differential Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5V
Max Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Max Voltage VOUT to GND (10s) . . . . . . . . . . . . . . . . . . . . . . . . . . .(V+) or (V-)
Max dv/dt Supply Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V/µs
ESD Rating
Human Body Model (Tested per JED22-A114F) . . . . . . . . . . . . . . . . . 4kV
Machine Model (Tested per JED22-A115B). . . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per JED22-C110D) . . . . . . . . . . . . . . 2kV
Latch-Up (Passed Per JESD78B). . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
5 Ld SOT-23 (Notes 7, 8) . . . . . . . . . . . . . . . 225
116
8 Ld SOIC (Notes 7, 8) . . . . . . . . . . . . . . . . . 125
77
6 Ld µTDFN (Notes 7, 8) . . . . . . . . . . . . . . . 220
120
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Ambient Operating Temperature Range
Industrial Grade Package . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Full Industrial Grade Package. . . . . . . . . . . . . . . . . . . . .-40°C to +125°C
Operating Voltage Range. . . . . . . . . . . . . . . . . 2.25V (±1.125V) to 6V (±3V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
7. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
8. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications V_S = 5V, V_CM = 2.5V, T_A = +25°C, unless otherwise specified. Boldface limits apply over the specified
operating temperature range.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 9) TYP (Note 9) UNIT
DC SPECIFICATIONS
V_OS
TCV_OS
Input Offset Voltage
Inptu Offset Voltage Temperature
Coefficient
T_A = -40°C to +85°C
T_A = -40°C to +125°C
T_A = -40°C to +125°C
-2.5 -0.2 2.5
µV
-3.4
-
3.4
µV
-4
-
-4
µV
-15 -0.5 15 nV/°C
I_B
Input Bias Current
T_A = -40°C to +85°C
T_A = -40°C to +125°C
TCI_B
Input Bias Current Temperature
T_A = -40°C to +85°C
Coefficient
T_A = -40°C to +125°C
I_OS
Input Offset Current
T_A = -40°C to +85°C
T_A = -40°C to +125°C
TCI_OS
Input Offset Current Temperature Coefficient T_A = -40°C to +85°C
T_A = -40°C to +125°C
Common Mode Input
Voltage Range
V+ = 5.0V, V- = 0V
Guaranteed by CMRR
-300 ±120 300
pA
-300
-
300
pA
-550
-
550
pA
-
±1.4
-
pA/°C
-
±2
-
pA/°C
-600 ±240 600
pA
-600
-
600
pA
-750
-
750
pA
-
±2.8
-
pA/°C
-
±4
-
pA/°C
-0.1
-
5.1
V
CMRR
PSRR
Common Mode Rejection Ratio
Power Supply Rejection Ratio
V_CM = -0.1V to 5.1V
V_CM = -0.1V to 5.1V
Vs = 2.25V to 6.0V
120 135
-
dB
115
-
-
dB
120 135
-
dB
Vs = 2.25V to 6.0V
120
-
-
dB
4
FN6957.3
December 22, 2011