ISL78307_15 Datasheet, PDF (3/9 Pages) Intersil Corporation – 40V, Low Quiescent Current, 50mA Linear Regulator for Automotive Applications

ISL78307
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +45V
IN pin to GND Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC
OUT pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . .. . .GND - 0.3V to 16V
EN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC
Output Short-circuit Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating
Human Body Model (Tested per JESD22-A114E) . . . . . . . . . . . . . . . . 6kV
Machine Model (Tested per JESD-A115-A) . . . . . . . . . . . . . . . . . . . 350V
Charge Device Model (Tested per AEC-Q100-011) . . . . . . . . . . . . . 2.2kV
Latch Up (Tested per JESD78B; Class II, Level A) . . . . . . . . . . . . . . . 100mA
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
8 Ld EPSOIC Package (Notes 4, 5) . . . . . . .
50
9
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +175°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . -40°C to +125°C
IN pin to GND Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+3V to +40V
OUT pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+2.5V to +12V
EN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V to +40V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. _JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
5. For _JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, unless otherwise noted. V_IN = 14V, I_OUT = 1mA, C_IN = 0.1μF,
C_OUT = 10μF, T_A = T_J = -40°C to +125°C, unless otherwise noted. Typical specifications are at T_A = +25°C. Boldface limits apply across the operating
temperature range, -40°C to +125°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 8) TYP (Note 8) UNIT
Input Voltage Range
V_IN
Cold Crank condition
6
40
V
3
40
V
Guaranteed Output
Current
I_OUT
V_IN = V_OUT + VDO
50
mA
Output Voltage
V_OUT
EN = High
V_IN = 14V
I_OUT = 0.1mA
3.3V Version
5V Version
ADJ pin voltage
3.267 3.3 3.333 V
4.950 5 5.050 V
1.211 1.223 1.235 V
Line Regulation
Load Regulation
Dropout Voltage
(Note 6)
Shutdown Current
Quiescent Current
V_OUT/V_IN 3V  V_IN  40V
I_OUT = 1mA
V_OUT/I_OUT V_IN = V_OUT +V_DO
I_OUT = 100µA to 50mA
V_DO
I_OUT = 1mA, V_OUT = 3.3V
I_OUT = 50mA, V_OUT = 3.3V
I_OUT = 1mA, V_OUT = 5V
I_OUT = 50mA, V_OUT = 5V
I_SHDN
EN = LOW
IQ
EN = High
V_IN = 14V
I_OUT = 0mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 1mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 10mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 50mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 0, 3.3V and 5.0V Version
I_OUT = 1mA, 3.3V and 5.0V Version
I_OUT = 10mA, 3.3V and 5.0V Version
I_OUT = 50mA, 3.3V and 5.0V Version
0.04 0.115 %
0.25 0.5 %
10
38 mV
130 340 mV
10
48 mV
120 350 mV
1.8 3.64 µA
18
24 µA
22
42 µA
34
60 µA
56
82 µA
22
28 µA
27
45 µA
37
65 µA
62
90 µA
Submit Document Feedback
3
FN7658.3
April 7, 2015