ISL78205 Datasheet, PDF (3/16 Pages) Intersil Corporation – 2.5A Buck Controller with Integrated High-Side MOSFET

ISL78205
Functional Pin Description (Continued)
PIN NAME
LGATE
NC
PAD
PIN #
20
7, 18
21
DESCRIPTION
In synchronous buck mode, this pin is used to drive the lower side MOSFET to improve efficiency.
In non-synchronous buck when a diode is used as the bottom side power device, this pin should be connected to VCC before
VCC start-up to disable the low side driver (LGATE).
No connection pin. Connect these pins to SGND at quiet ground copper plane.
Bottom thermal pad. It is not connected to any electrical potential of the IC. In layout, it must be connected to PCB ground
copper plane with area as large as possible to effectively reduce the thermal impedance.
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL78205AVEZ
78205 AVEZ
-40 to +105
20 Ld HTSSOP
MDP0048
NOTES:
1. Add “-T*” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL78205. For more information on MSL please see techbrief TB363.
3
FN7926.0
September 22, 2011