ISL73096RH Datasheet, PDF (3/4 Pages) Intersil Corporation – Radiation Hardened Ultra High Frequency NPN/PNP Transistor Arrays

ISL73096RH, ISL73127RH, ISL73128RH
Die Characteristics
DIE DIMENSIONS:
52.8 mils x 52.0 mils x 14 mils ±1 mil
1340μm x 1320µm x 355.6µm ±25.4µm
INTERFACE MATERIALS:
Glassivation:
Type: Nitride
Thickness: 4kÅ ±0.5kÅ
Top Metallization:
Type: Metal 1: AlCu (2%)/TiW
Thickness: Metal 1: 8kÅ ±0.5kÅ
Type: Metal 2: AlCu (2%)
Thickness: Metal 2: 16kÅ ±0.8kÅ
Substrate:
UHF-1X Bonded Wafer, DI
Backside Finish:
Silicon
Metallization Mask Layout
ASSEMBLY RELATED INFORMATION:
Substrate Potential:
Floating
ADDITIONAL INFORMATION:
Worst Case Current Density:
3.04 x 10⁵A/cm²
Transistor Count:
5
(2) Q2C (1) Q1C(16) Q1E(15) Q1B
(3) Q2E
(4) Q2B
(5) NC
(6) Q3C
(14) Q5
(13) Q5
(12) Q5
(11) Q4
(7) Q3E (8) Q3B (9) Q4B(10) Q4E
FIGURE 1. ISL73096RH, ISL73127RH
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications
at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by
Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any
infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
3
FN6475.3
November 12, 2009