ISL59834 Datasheet, PDF (3/17 Pages) Intersil Corporation – Quad Channel, Single Supply, Video Reconstruction Filter with On-Board Charge Pump

ISL59834
Absolute Maximum Ratings (T_A = +25°C)
V_S to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4V
V_IN to GND. . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to V_S + 0.3V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . ±50mA
Maximum Current into Any Pin . . . . . . . . . . . . . . . . . . . . . . . ±50mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .3500V
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .350V
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
44 Lead QFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
NOTE:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
Electrical Specifications V_CP = V_S = 3.3V, C_F1 = C_F2 = 0.1µF, C_S1 = C_S2 = 0.22µF, C_FIL1 = C_FIL2 = 0.4µF, C_IN1 = C_IN2 = C_IN3 = C_IN4 =
0.1µF, R_L1 = R_L2 = 150Ω, Typical T_A = +27°C.
SYMBOL
PARAMETER
CONDITIONS
MIN
MAX
(Note 2) TYP (Note 2) UNIT
DC CHARACTERISTICS
V_S, V_CP
VEE_OUT
I_S
I_CP
I_PD
I_IN
I_B
A_V
V_{IN_MAX}
V_CLAMPOUT1
Supply Range
Charge Pump Output
Supply Current
Charge Pump Supply Current
Power-down Current
Input Pull-down Current
Input Bias Current
DC Gain
Max DC Input Range
Output Sync Tip Clamp Level
(Channels 1 and 3)
Guaranteed by PSRR
Measured at VEE_IN
No load
No load
ENABLE = 0.4V
Channels 1 and 3, V_IN = 0.5V
Channels 2 and 4, V_IN = 0.5V, SYNC_IN = 0V
DC-coupled input, guaranteed by DC gain test
V_IN ≤ 0, AC-coupled input
3.0 3.3 3.6
V
-1.75 -1.5 -1.25
V
28
32
mA
35
40
mA
0.6
5
µA
0.4
4
10
µA
-10
-3
10
µA
1.94
2
2.05
V/V
1.4
V
-650 -590 -525
mV
V_CLAMPOUT2
Keyed Clamp Level
(Channels 2 and 4)
Output level when SYNC_IN ≥ 2.0V
-60 -25
0
mV
V_CLAMPIN1
Input Clamp Level
(Channels 1 and 3)
Input floating
0
30
70
mV
V_CLAMPIN2
Input Keyed Clamp Level
(Channels 2 and 4)
Input floating, input level when SYNC_IN ≥ 2.0V
275 300 375
mV
V_OS
Output Level Shift
(Channels 1 and 3)
V_IN > 0, output shifted relative to input, DC-coupled -685 -620 -550
mV
input
Output Level Shift
(Channels 2 and 4)
V_IN > 0, output shifted relative to input, DC-coupled -380 -330 -280
mV
input
I_CLAMP
Clamp Restore Current
V_SLICE
PSRR_DC
Sync Detect Threshold
Power Supply Rejection
Force V_IN = -0.3V, Channels 1 and 3
Force V_IN = 1V, Channel 2 and 4
Force V_IN = -0.3V, Channels 2 and 4
Channels 1 and 3
V_S = +3.0 to +3.6
-5
-2.5
mA
135 180
µA
-200 -160
µA
100
200
mV
50
77
dB
3
FN6268.1
June 11, 2008