ISL54228 Datasheet, PDF (3/17 Pages) Intersil Corporation – High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP)

ISL54228
CODEC SUPPLY
2.7V to 3.3V
2.7V to 3.3V
TABLE 1. USB - OVP POSSIBLE SITUATIONS AND TRIP POINT VOLTAGE
TRIP POINT
SWITCH SUPPLY (V_DD)
2.7V to 5.25V
COMS SHORTED TO
VBUS
PROTECTED
Yes
MIN
3.62V
MAX
3.95V
2.7V to 5.25V
-5V
Yes
-0.6V
-0.29V
Ordering Information
PART
NUMBER
PART
TEMP. RANGE
MARKING
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54228IRUZ-T (Note 1, 3)
U6
-40 to +85 8 Ld 1.2mmx1.4mm µTQFN (Tape and Reel) L8.1.4x1.2
ISL54228IRUZ-T7A (Note 1, 3)
U6
-40 to +85 8 Ld 1.2mmx1.4mm µTQFN (Tape and Reel) L8.1.4x1.2
ISL54228IRTZ-T (Note 1, 2)
228
-40 to +85 8 Ld 2mmx2mm TDFN (Tape and Reel)
L8.2x2C
ISL54228IRTZ-T7A (Note 1, 2)
228
-40 to +85 8 Ld 2mmx2mm TDFN (Tape and Reel)
L8.2x2C
ISL54228IRUZEVAL1Z
Evaluation Board
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach
materials and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
4. For Moisture Sensitivity Level (MSL), please see device information page for ISL54228. For more information on MSL please
see techbrief TB363.
3
FN7628.0
July 29, 2010